Simple co2 lasers with 20% wall plug efficiency

OBSOLETED

JUST ADD WATER AND IT IS READY !

Reliable, simple and sturdy 25 Watt Turn Key CO2 Laser System shown here.

PLX25-s is a turn-key 25 Watt sealed system for any application requiring a compact co2 laser.

RELIABLE; The laser tube is made and processed in our own facility in the USA and is backed by a full year, warranty on power performance.

SIMPLE; Connect the water line, plug into the wall and turn it ON. You can use the internal 5 Vdc signal to control the laser or apply your own 5 Vdc signal from your computer. An internal flow switch will automatically disable system if ' No Flow ' condition exists.

and STURDY; Mounted on a 6 inch wide Aluminum channel and covered with a 6" x 4.5" x 32" long (150 x 115 x 813 mm) Aluminum enclosure with adjustable legs.

Specs

Laser head
Picture 1 Output Power = 25⁺ Watts CW
Beam diameter = 6 mm @ 1/e²
Spatial Mode = TEM_oo; M²<1.2
Dimensions = 6 x 4.5 x 32 inches (15 x 11.5 x 81.5 cm)
Weight = 11 lbs (5 kg)

Power supply
and controller
Picture 2
Internal and External Control
Internal;
Manual On/Off
Manual continuous power adjustment from Min. to Max included or for
External control user to provide signal 0-5 Vdc :
On / Off = 5 / 0 Vdc, external connector
0-5 Vdc signal to adjust power from Min. to Max, external connector.
CW or pulse operation (Max. On/Off switching 500 times per sec)
Electrical = 4A at 110 VAC / 2A at 220 VAC

PX50-s includes;
HV Power supply for PLX25 laser tube
Internal manual and External control of all functions,
Key switch, flow switch, flow fault indicator,
cover interlock, laser emission and laser current monitor
Power supply Dimensions : 19.5 x 7.75 x 6.5 inches (44 x 20 x 17 cm)
Weight : 6-1/2 lbs (3 kg)

Please contact Parallax to place an order or request further information.

Table of Contents